Less Impact, Proven Performance. Mick Fanning Performance Twin EcoPure® Traction has been purpose designed by Mick for his latest twin fin board design that is fine tuned for dynamic surfing. This 2-piece Square Loc has more traction area and no arch to provide complete foot contact and response. FEATURES EcoPure® Organic Additive - Biodegradable FOAM Square Loc - Traction Pattern 7mm Teardrop Arch Bar 28mm Table Top Kick 2 Piece 3M™ Adhesive Responsible Packaging - Recyclable + Biodegradable SPECS L - 312mm (12 3/8"") W - 324mm (12 3/4"")
The 3 piece RELIANCE THERMO-LITE offers a more responsive + lighter option. The large kick, mega cut-outs and no arch for even more reduced weight and elevated board feel. FEATURES THERMO-LITE Square Loc II - Traction Pattern - 15%. Lighter Flat Pad 35mm Ramp Large Kick 3 Piece 3M™ Adhesive Responsible Packaging - Recyclable + Biodegradable SPECS L - 310mm (12 1/4"") W - 300mm (11 3/4"")
The RELIANCE III 3 piece traction has mega cut-outs for reduced weight and added board feel. The large kick and Square Loc II traction increases grip to lock in foot. FEATURES Square Loc II - Traction Pattern 7mm Teardrop Arch Bar 35mm Ramp Large Kick 3 Piece 3M™ Adhesive Responsible Packaging - Recyclable + Biodegradable
DESCRIPTION and FEATURESThe 3 piece RELIANCE THERMO-LITE offers a more responsive + lighter option. The large kick, mega cut-outs and no arch for even more reduced weight and elevated board feel.Type: Traction PadFEATURESTHERMO-LITE Square Loc II - Traction Pattern - 15%. LighterFlat Pad35mm Ramp Large Kick3 Piece3M™ AdhesiveResponsible Packaging - Recyclable + Biodegradable SPECSL - 310mm (12 1/4")W - 300mm (11 3/4")
8x World Champion Stephanie Gilmore tried and tested team mate Italo Ferreira's dual traction and loved it! The performance of Square Loc and THERMO-LITE traction gave Steph unrivalled confidence in her pad. SIGNATURE FEATURES: EcoPure® Organic Additive - Biodegradable FOAM Dual Traction: Square Loc x THERMO-LITE Square Loc - Traction Pattern 7mm Teardrop Arch Bar 30mm Alpine Kick 3 Piece 3M™ Adhesive Responsible Packaging - Recyclable + Biodegradable DIMS: L - 300mm (11 3/4"") W - 296mm (11 5/8"")
DESCRIPTION and FEATURESBig wave surfer and aerialist Albee Layer relies on these traction pads when dropping into Jaws and sticking airs. This three-piece pad features 25 mm vert wedge tail kick and a 7 mm center arch plus custom beveled edges and localized cutouts for enhanced board feel. It features biodegradable foam and marine-grade 3M® adhesive.Type: Traction PadDakine Friendly Foam Biodegradable Eva FoamPositraction Grid PatternThree Piece Pad7Mm Center Arch25Mm Vert Wedge Tail Kick With Beveled EdgesCut Outs Enhance Board Feel And Increase Grip3M® High Grade Adhesive
DESCRIPTION and FEATURESWhether you're looking to stomp more airs or get blown out of monster barrels, these front foot traction pads add surefooted grip. Available in black or camo, the six-piece design allows for customization on a range of boards, and the low-profile pattern and isolated cutouts maximize underfoot grip and board feel. Like all Dakine traction, this front foot pad is made of biodegradable Friendly Foam, sold in plastic-free packaging, and uses marine-grade 3M® adhesive.Type: Traction Pad100% Ethylene Vinyl Acetate18" x 15.5" [ 46 x 39cm ] Dakine Friendly Foam biodegradable EVA foam Plastic free packaging Low profile grip pattern Six piece design allows for increased size and placement customization 3M® high grade adhesive
DESCRIPTION and FEATURESType: Traction Pad2 Year Limited WarrantyYouth size for smaller boardsDakine Friendly Foam biodegradable EVA foamTriple cut Positraction grid patternThree-piece pad5mm center arch25mm vert wedge tail kick with beveled edgesDrilled holes through kick to enhance water flowCutouts enhance board feel and increase grip3M® high-grade adhesivePlastic-free packaging
DESCRIPTION and FEATURESBuilt in collaboration with Hawaii-raised, history-making surfer John John Florence, this traction pad is designed around John John's specific dimensions and progressive style. Delivering maximized grip and precision via triple-cut Positraction grip, a five-piece design allows adjustability for use on an array of boards, from everyday shortboard to step-up. Holes in the kick tail reduce drag, and a 25mm vertical wedge design was sculpted precisely for John John's form. Like all Dakine traction, John John's pad is made of biodegradable Friendly Foam, sold in plastic-free packaging, and uses marine-grade 3M® adhesive.Type: Traction Pad2 Year Limited WarrantyYouth size for smaller boardsDakine Friendly Foam biodegradable EVA foamPlastic free packagingTriple cut Positraction grid patternThree piece pad5mm center arch25mm vert wedge tail kick with beveled edgesDrilled holes through kick to enhance water flowCut outs enhance board feel and increase grip3M® high grade adhesive13 x 12.5" (33 x 31.25 cm)
DESCRIPTION and FEATURESBuilt in collaboration with Hawaii-raised, history-making surfer John John Florence, this traction pad is designed around John John's specific dimensions and progressive style. Delivering maximized grip and precision via triple-cut Positraction grip, a five-piece design allows adjustability for use on an array of boards, from everyday shortboard to step-up. Holes in the kick tail reduce drag, and a 25mm vertical wedge design was sculpted precisely for John John's form. Like all Dakine traction, John John's pad is made of biodegradable Friendly Foam, sold in plastic-free packaging, and uses marine-grade 3M® adhesive.Type: Traction Pad100% Ethylene Vinyl Acetate13" x 12.5" (33 x 31.75 cm) Dakine Friendly Foam biodegradable EVA foam Plastic free packaging Triple cut Positraction grid pattern Five piece pad 7mm center arch 25mm vert wedge tail kick with beveled edges Drilled holes through kick to enhance water flow Cut outs enhance board feel and increase grip 3M® high grade adhesive
DESCRIPTION and FEATURESMore traction, less weight. Our Superlite Surf Traction Pad keeps your feet in place with an airy cutout pattern and proven grip. The three-piece design features beveled corners to reduce drag with a 7mm center arch and 25mm rolled ramp tail kick. Like all Dakine traction, it's made of biodegradable Friendly Foam, sold in plastic-free packaging, and uses marine-grade 3M® adhesive.Type: Traction Pad100% Ethylene Vinyl Acetate12" x 12.25" [ 30 x 31cm ] Dakine Friendly Foam biodegradable EVA foam Plastic free packaging Positraction grid pattern Three piece pad 7mm center arch 25mm rolled ramp tail kick with beveled edges Cut outs enhance board feel and increase grip 3M® high grade adhesive
Overview Designed and tested in collaboration with the world’s best surfers, the FCS Athlete Series Traction range has rider specific features for the ultimate in performance. Features 3 pieces pad Double Square Groove Trapeze arch bar High tail kick Sanded surfaces for enhanced grip Ultra thin sensitivity Channels for extra resistance
DESCRIPTION and FEATURESThe new FCS Traction marries considered design with performance features and superior materials.Type: Surfboard Cover Fish 2/3 piece pad Modular design for varied fish shapes Diamond groove Low profile kick Sanded surfaces for enhanced grip Ultra thin sensitivity Feather light traction Perforated for extra resistance
Overview EG's highflying approach requires a pad with a pretty aggressive groove pattern and significant surface area. This three-piece pad can be spread to accommodate wider tails, and the rounded edges are not only aesthetically pleasing but also help prevent corners from lifting up. Features 3 piece pad Diamond III Groove Barrel Arch Med/HIgh tail kick
Grip Gorilla Kyuss of 3 pieces made with ultra-light EVA foam and adhesive of great durability. A surf pad that you can use in many models of surfboards. 3 piece Grip with central arch.
The Otis Series pads or grips will add a unique style to your board. The diamond grooves are high profile and well spaced, allowing your foot to fit into the gaps and stay locked in. The larger, square-shaped copper arch bar is designed to firmly lock your foot between the arch and kick for more aggressive turns. Ultra-lightweight low profile sanded EVA grip for extra feel. Features: 1 piece 2mm thick low profile grip. 30 x 29 cm. With 22 mm kick tail, With 5mm central arch or arch bar. AZTEC Pad Grooves Allows for foot pressure at any angle. High profile, well spaced diamond shaped grooves allow your foot to fit into the grooves locking it in place. Sanded EVA for extra grip. Adhesive surfboard grip. Ultra lightweight.
DESCRIPTION and FEATURESAdhesive Tail Pad, insures grip and maintains riders foot well in place while blasting moves.Type: Traction Pad3 Piece, 30 x 28,5cm, with no arch bar and no kick tail.
Overview The Tres is a three-piece pad with dual cuts through the kick to accommodate multiple tail shapes. Gorilla's exclusive tri-hex groove, side piece perforations, and channels that run through the arch bar provides are unique and effective texture which feels very secure underfoot. Features 3 piece pad Tri-Hex Groove Copperhead Arch Med/High Kick
DESCRIPTION and FEATURESType: DECK PARA PRANCHA DE SURF TAIL PAD CENTRE PRO 330MMCombine LEFT & RIGHT with a CENTRE to make a unique pad!, Arch: 7mm., Kick: 25mm., Grooves: Square, Power Kick: HD EVA Tail.
Add some flair to your stick with the Blaze 3-piece surfboard tail pad. Designed for high performance surfing, the Vert Power Kick gives added grip, control and drive, with an extra hit of colour. Length: 305mm Width: 300mm Pieces: 3 Arch: 7mm Power Kick: 25mm (Vert) Tread Pattern: Diamond
DESCRIPTION and FEATURESHigh performance traction, custom designed & refined by Owen Wright. Constructed from lightweight, high impact, water resistant EVAType: Traction PadLength: 300mmWidth: 300mmPieces: 3Arch: 7mmKick: 25mmFeatures: Base-Flex, Kick-Flex
As the name suggests, our Simple Jack 3 Piece pad is just that, simple! Not skimping on quality or performance, this surfboard tail pad is bang for buck. A high quality performance traction with diamond grooves. Length: 305mm Width: 300mm Pieces: 3 Arch: 7mm Power Kick: 25mm Tread Pattern: Diamond
DESCRIPTION and FEATURESThe GOOD VIBES is the newest addition to our traction tribe. Designed specifically with a narrower tail or smaller board in mind, this three-piece pad is a great option for those step up boards, guns, and any grom-sized surfboard. Vertical slits on the sidepieces, circular traction cavities in the raised arch bar, and a 25mm tail kick means there are no second thoughts when taking the drop! Choose between Diamond Dot and Square Cut groove.Type: Traction Pad• 3 Piece• 3mm thick• Width 285mm x Height 275mm• Tail Kick: Length 55mm x Height 27mm• Arch bar: Height 5mm x Width 45mm x Length 143mmDIAMOND DOT GROOVE - Thickness, 3mmSlightly thinner than our regular patterns, thisdesign has been developed with high performance inmind. Tested around the globe by WSL ChampionshipTour surfer Caio Ibelli, the addition of the micro dot tothe vertically placed diamond groove ensures maximumgrip, with an even closer connection to your board -making it truly the F1 fabrication of our range.
DESCRIPTION and FEATURESThe GOOD VIBES is the newest addition to our traction tribe. Designed specifically with a narrower tail or smaller board in mind, this three-piece pad is a great option for those step up boards, guns, and any grom-sized surfboard. Vertical slits on the sidepieces, circular traction cavities in the raised arch bar, and a 25mm tail kick means there are no second thoughts when taking the drop! Choose between Diamond Dot and Square Cut groove.Type: Traction Pad• 3 Piece• 3mm thick• Width 285mm x Height 275mm• Tail Kick: Length 55mm x Height 27mm• Arch bar: Height 5mm x Width 45mm x Length 143mmSQUARE CUT GROOVE - Thickness, 5mmOur most durable traction pattern has beendesigned to last under the most rigorous use.For the heavy-footed surfer that is looking forunfaltering traction but also likes the comfortof a soft cushion-like pad - this design is aluxurious workhorse that will last as long asyour board!
Mostrando: 169-40 de 40 Item(ns)