DESCRIPTION and FEATURES Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions. Overview Designed for a balance of speed, flow & response with added control.Oversized, all-round template with a fuller tip.Ideal for surfers who like to attack the wave and perform aggressive turns. Ideal Conditions A wide range of conditions, particularly good in critical overhead waves. Board Types Designed to fit the FCS II Fin System.Recommended for performance shortboards with moderate-to-low rocker.
DESCRIPTION and FEATURES Designed for a balance of speed, flow & response. Well proportioned template with Inside Foil Technology (IFT). Ideal for surfers who want a reliable All Round fin delivering a combination of speed and maneuverability with flow between turns.Neo Glass fins are precision molded using long strand fiberglass and a marine grade polymer. Very affordable yet considered a premium construction due to its high fiberglass content and active flex pattern, these fins will accommodate a wide range of surfers and surfing conditions. Type: FCS II Fin System A wide range of conditions from beach breaks to point breaks.Designed to fit the FCS II Fin System.Recommended for all board types.Performer: Find Balance. A balance of speed, flow & response.X-SMALL (Under 55Kg / 120 Lbs)SMALL (55Kg - 70Kg / 120 - 155 Lbs)MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)LARGE (75Kg - 90Kg / 165 - 200 Lbs)X-LARGE (Over 85Kg / 190 Lbs)
DESCRIPTION and FEATURESLow aspect keel template designed for fish shapes with contemporary outlines and concaves. Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.Type: Surfboard FinsDesigned to fit the FCS II Fin System.X-LARGE (Over 85Kg / 190 Lbs)Lowest area keel in the FCS range.Recommended for all board types including fish, funboard and twin fin boards.
DESCRIPTION and FEATURESIf you've ever watched pro rider Julian Wilson surf, you've probably marveled at his explosive power off the lip yet predictable control through bottom end turns. While there's no doubt the man is an amazing athlete, his riding is also backed by the specially designed FCS II JW PG Medium Tri Fin Set. Crafted with a Performance Glass construction, these fins exhibit a more traditional fiberglass flex pattern with a stiff, stable base and more responsive tip. Ideal for thrusters with deep concaves and moderate-to-extreme rocker, the JW PG Medium Tri Fin Set is just what you need to keep pushing your limits.Type: Surfboard FinsFin Specs – Base: 4.46" / Depth: 4.4.56" / Area: 15.13in² / Sweep: 33.3?Side Fins - 80/20 Foil Center Fin - 50/50 Foil Ideal Conditions – Open face, down-the-line waves, particularly good in point and reef breaks.Board Types – Performance boards with deep concaves and moderate-to-extreme rocker.Material: Fiberglass
DESCRIPTION and FEATURESWhen Jason Stevenson (JS Surfboards) set out to design fins, he wanted an all-around reliable setup that focuses on flow and drive for a smooth ride. The FCS II JS PC Large Tri Fin Set does just that thanks to a slightly longer rake and snappy performance core construction. Performance Core (PC) material and construction is designed to deliver the feeling of a traditional fiberglass fin with the added performance of reduced weight. The RTM (Resin Transfer Moulding) process produces a lightweight fin with remarkable flex, a smooth feel and an impressive aesthetic.Type: Surfboard FinsFin Specs – Base: 4.61" / Depth: 4.65" / Area: 15.81" / Sweep: 36.1°FCS II Fin System – This fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.Material : Fiberglass, Resin
DESCRIPTION and FEATURES Type: Surfboard Fins100% FiberSistem: FCS II
DESCRIPTION and FEATURES Type: Surfboard FinsMATERIAL PGCONFIGURAÇÕES QUILHAS 3 QUILHASSISTEMA FCS II
DESCRIPTION and FEATURES Type: Surfboard FinsMATERIAL PERFORMANCE GLASSCONFIGURAÇÕES QUILHAS 2 QUILHASCOLOR PROV. BLACKGENERO UNISEXSISTEMA FCS II
DESCRIPTION and FEATURES Type: Surfboard FinsMATERIAL NEO GLASSCOLOR PROV. CHARCOALSISTEMA FCS II
DESCRIPTION and FEATURESConstructed with ultra-light materials and combines the drawn out influences of a more raked fin with the all-round versatility of the Performer. Delivers exceptional drive and control off the bottom without hampering the speed off the top and release through the lip. Type: Surfboard FinsUpdated PC construction featuring ultralight AirCore.Accelerator: Find Control. Speed, flow and response with added control.Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin. AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.
DESCRIPTION and FEATURESKolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release. Designed for performing fast, explosive turns and airs on and above the wave. Type: Surfboard FinsDesigned to fit the FCS II Fin System.Recommended for performance shortboards with moderate-to-extreme rocker.Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
DESCRIPTION and FEATURESElongated fin for performing long arc turns. High degree of sweep angle provides exceptional control off the bottom and when carving on the open face. Designed for power surfers who like to push hard against their fins and draw out their turns.Type: Surfboard FinsBase: 4.47 / 113mmDepth: 4.54 / 115mmArea: 14.96 ² / 9650mm²Sweep: 37.0ºFoil: Flat
DESCRIPTION and FEATURESThe FCS II Reactor PC Charcoal / Black Large Tri Set fin set come from the Essential Series. The FCS II Reactor fins are inspired by the traditional K2.1 and TC fin sets and are ideal for wider tail surfboards. The upright template allows fluid rail-to-rail transitions, tight turns, and aggressive snaps. This is the ideal set for the rider looking to stay locked in the sweet-spot and who likes to boost plenty of aerials in hollow or punchy beach breaks.Type: Surfboard FinsBase: 4.45" / 113mmDepth: 4.68" / 119mmArea: 15.73"² / 10150mm²Sweep: 31.9ºFoil: FlatDesigned for speed and tight turns, with added tail release.Upright template allows for tighter, more acute directional changes.Smaller centre fin for increased pivot and tail release.Ideal for surfers who like to perform fast, progressive turns.
DESCRIPTION and FEATURESDeveloped in conjunction with Darren Handley from DHD Surfboards. Suited to performance and hybrid shortboards. Gloss finish inside face / sanded finish outside face. A wide range of conditions, particularly good in critical overhead waves. Type: Surfboard FinsDesigned to fit the FCS II Fin System.For all board types. Best suited to performance and hybrid shortboards.Accelerator: Find Control. Speed, flow and response with added control.
DESCRIPTION and FEATURESGulian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns. Open face, down-the-line waves, particularly good in point and reef breaks. Type: Surfboard FinsDesigned to fit the FCS II Fin System.Recommended for performance shortboards with moderate-to-extreme rocker.AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.LARGE (75Kg - 90Kg / 165 - 200 Lbs)
DESCRIPTION and FEATURESThe FCS II Carver Neo Glass Acid Tri Set are an elongated fin for performing long arc turns. The Carver has an extended sweep angle that provides excellent control off the bottom and when carving the face. The FCS II Carver Neo Glass Acid Tri Set are designed for open face, down-the-line waves, particularly good in point and reef breaks. This is the 'go-to' fin set for power surfers who push hard against their fins and carve long drawn-out turns on the wave face. FCS recommend the Carver fin for boards with deep concaves and moderate-to-extreme rocker.Type: Surfboard FinsBase: 4.58" / 116mmDepth: 4.66" / 118mmArea: 15.73"² / 10150mm²Sweep: 37.0ºFoil: Flat
DESCRIPTION and FEATURESPerformance Core (PC) material is light and can be used in a variety of different conditions. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. Type: Fcs Ii Quad FinsThe Seaside Quad is Rob Machado’s first signature FCS II fin template.Designed specifically for his Firewire Seaside model.This semi-keel + stabiliser offers the flow of a traditional twin fish with the control of a performance quad setup.Quad set containing 4 fins.A wide range of conditions from beach breaks to point breaks, Ideally suited to smaller, weaker waves.Designed to fit the FCS II Fin System.Recommended for all board types including fish, funboard and twin fin boards.
DESCRIPTION and FEATURESA balance of speed, flow and response in a variety of conditions. Lightweight performance fin with responsive tip flex and hydrodynamic foil on the side fins.Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.Type: FCS II Fin SystemPC-2, PC-3, PC-5, PC-7 fins.Will fit the FCS II Fin System when used with grub screws and the FCS Infill Kit.A wide range of conditions from beach breaks to point breaks.All board types.X-SMALL (Under 55Kg / 120 Lbs)SMALL (55Kg - 70Kg / 120 - 155 Lbs)MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)LARGE (75Kg - 90Kg / 165 - 200 Lbs)X-LARGE (Over 85Kg / 190 Lbs)
DESCRIPTION and FEATURESMick's fin in Neo Carbon material delivers an injection of power and speed through turns due to the whipping effect through the tip of the fin. Ideal for fast, energetic surfing in softer conditions.Neo Carbon fins are precision moulded using long strand carbon and the highest-grade European resin. These fins are super light with a firm spring loaded flex. Neo Carbon fins actually help surfers generate speed in smaller conditions via the whipping effect that propels you from one turn into the next.Type: FCS II Fin SystemThis fin provides maximum drive.Open face, down-the-line waves, particularly good in point and reef breaks.Designed to fit the FCS II Fin System.Recommended for performance shortboards with moderate-to-extreme rocker.Carver: Find Power. Powerful, drawn-out turns with added hold.X-SMALL (Under 55Kg / 120 Lbs)SMALL (55Kg - 70Kg / 120 - 155 Lbs)MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)LARGE (75Kg - 90Kg / 165 - 200 Lbs)X-LARGE (Over 85Kg / 190 Lbs)
DESCRIPTION and FEATURESMatt 'Mayhem' Biolos's signature template delivers a lively combination of drive, hold and manoeuvrability. This versatile fin will feel reliable out on the open face or tight in the pocket.Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon thats designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.Type: FCS II Fin SystemDesigned to fit the FCS II Fin System.A wide range of conditions, particularly good in critical overhead waves.Designed to fit the FCS II Fin System.Performance shortboards and hybrid models.Reactor: Find Speed. Speed, tight turns & snaps.X-SMALL (Under 55Kg / 120 Lbs)SMALL (55Kg - 70Kg / 120 - 155 Lbs)MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)LARGE (75Kg - 90Kg / 165 - 200 Lbs)X-LARGE (Over 85Kg / 190 Lbs)
DESCRIPTION and FEATURESKolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release. Designed for performing fast, explosive turns and airs on and above the wave.Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.Type: FCS II Fin SystemA wide range of conditions, particularly good in critical overhead waves.Designed to fit the FCS II Fin System.Recommended for performance shortboards with moderate-to-extreme rocker.Accelerator: Find Control. Speed, flow and response with added control.X-SMALL (Under 55Kg / 120 Lbs)SMALL (55Kg - 70Kg / 120 - 155 Lbs)MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)LARGE (75Kg - 90Kg / 165 - 200 Lbs)X-LARGE (Over 85Kg / 190 Lbs)
Mostrando: 1-28 de 34 Item(ns)