DESCRIPTION and FEATURESWhether you're looking to stomp more airs or get blown out of monster barrels, these front foot traction pads add surefooted grip. Available in black or camo, the six-piece design allows for customization on a range of boards, and the low-profile pattern and isolated cutouts maximize underfoot grip and board feel. Like all Dakine traction, this front footpad is made of biodegradable Friendly Foam, sold in plastic-free packaging, and uses marine-grade 3M® adhesive.Type: Traction Pad2 Year Limited WarrantyDakine Friendly Foam biodegradable EVA foamPlastic free packagingLow profile grip patternSix piece design allows for increased size and placement customization3M® high grade adhesive
DESCRIPTION and FEATURES Type: Traction Pad Dakine Friendly Foam biodegradable EVA foam12" x 12.25" [ 30 x 31cm ] 2 Year Limited Warranty Dakine Friendly Foam biodegradable EVA foam Positraction grid pattern Three piece pad 7mm center arch 25mm rolled ramp tail kick with beveled edges Cut outs enhance board feel and increase grip 3M® high grade adhesive
DESCRIPTION and FEATURES Type: Traction Pad Dakine Friendly Foam biodegradable EVA foam12" x 12.25" [ 30 x 31cm ] Dakine Friendly Foam biodegradable EVA foam Plastic free packaging Positraction grid pattern Three piece pad 5mm center arch 20mm ramp tail kick 3M® high grade adhesive
DESCRIPTION and FEATURES Type: Traction Pad Dakine Friendly Foam biodegradable EVA foam13" x 12.5" (33 x 31.75 cm) Dakine Friendly Foam biodegradable EVA foam Plastic free packaging Triple cut Positraction grid pattern Five piece pad 7mm center arch 25mm vert wedge tail kick with beveled edges Drilled holes through kick to enhance water flow Cut outs enhance board feel and increase grip 3M® high grade adhesivextagstartz
DESCRIPTION and FEATURESTreat your board right. From routine storage to everyday transport, our Daylight Surfboard Bag offers unbeatable lightweight, padded coverage. It features a generous outline and a full run of sizes for a near custom fit for your hybrid-style boards. Once tucked inside, boards enjoys heat- and water-resistant coverage plus full-length and generous 1/4-inch (6.5mm) foam-padded ding protection. A padded shoulder strap leaves your hands free for other gear.Type: Surfboard CoverLimited Lifetime WarrantyGenerous outline to fit wider/alternative shapesUpgraded heat- and water-resistant tarpaulin material1/4" [6.5mm] foam paddingGenerous outline to fit wider retro and fish shapesHeavy-duty, YKK® coil zipperNon-slip padded shoulder strap with stash pocketWax/fin pocket
DESCRIPTION and FEATURESThe Dakine Longboard calf leash gives you room to roam on your longboard. At 9' 6", it lets you ride the nose and the calf cuff helps reduce cord wrap at your feet. Maximum strength 1/4-inch (6.5mm) urethane Dura-Cord can handle up to a couple feet overhead. The design is made for easy movement, long-lasting durability and comfort.Type: Surf LeashUp To A Couple Feet Overhead Intended Use1/4" (6.5mm) Highest Quality Urethane Dura-Cord For Maximum Strength2" (50mm) Molded Neoprene Calf CuffPosi-Lock Hook-And-Loop ClosureOpti-Flex Leash Ends For Maximum Durability100% Marine Grade Stainless Steel Swivels1.5" (40mm) Detachable RailsaverEasy Clip Compatible For Maximum Safety
DESCRIPTION and FEATURESThe Kainui Team Leash is optimized for surfing peaks up to a couple feet overhead. The Kainui Leash features refinements that reflect Dakine's 37 years of dedication to leash innovation and craftsmanship including a streamlined design featuring a 1/4-inch (6.5mm) urethane Dura-Cord for maximum strength with minimal drag, durable Opti-Flex leash ends, and a comfy 1.5-inch molded neoprene cuff. The high-performance Kainui Team surf leash is offered in 6-, 7- and 8-foot lengths.Type: Surf Leash2 Year Limited WarrantyUp to a couple feet overhead intended use1/4" (6.5Mm) Highest Quality Urethane Dura-Cord For Maximum Strength1.5" (40Mm) Molded Neoprene Ankle CuffPosi-Lock Hook & Loop ClosureRedesigned Molded Opti-Flex Leash Ends For Maximum Durability100% Marine Grade Stainless Steel Swivels1" (25Mm) Detachable RailsaverEasy Clip compatible for maximum safetyDimentions: 6' x 1/4" [ 1.83m x 6.5mm ]7' x 1/4" [ 2.13m x 6.5mm ]
DESCRIPTION and FEATURESDakine is honored to partner with the world's best surfer, John John Florence, to bring you this custom designed Kainui 6' X 1/4" Leash. John John's riding style calls for a serious leash, the Kainui Leash offers the security you need in surf a few feet overhead. Constructed of the highest quality 1/4-inch (6.5mm) urethane Dura-Cord for maximum strength to keep you connected to your board in even the strongest surf. The Kainui is a continuation of Dakine's dedication since 1979 to making and refining surf leashes that protect both surfers and their boards in the most consequential conditions. All John John Florence products are packaged using sustainable recycled cardboard products with zero plastic keeping our oceans clean for tomorrow.Type: Surf Leash2 Year Limited WarrantyJohn John Florence signature styleUp To A Couple Feet Overhead Intended Use1/4" (6.5Mm) Highest Quality Urethane Dura-Cord For Maximum Strength1.5" (40Mm) Molded Neoprene Ankle CuffPosi-Lock Hook & Loop ClosureRedesigned Molded Opti-Flex Leash Ends For Maximum Durability100% Marine Grade Stainless Steel Swivels1" (25MM) detachable railsaverEasy Clip compatible for maximum safety6' x 1/4" [ 1.83m x 6.5mm ]
DESCRIPTION and FEATURESThe Kainui Team Leash is optimized for surfing peaks up to a couple feet overhead. The Kainui Leash features refinements that reflect Dakine's 37 years of dedication to leash innovation and craftsmanship including a streamlined design featuring a 1/4-inch (6.5mm) urethane Dura-Cord for maximum strength with minimal drag, durable Opti-Flex leash ends, and a comfy 1.5-inch molded neoprene cuff. The high-performance Kainui Team surf leash is offered in 6-, 7- and 8-foot lengths.Type: Surf Leash2 Year Limited WarrantyUp to a couple feet overhead intended use1/4" (6.5Mm) Highest Quality Urethane Dura-Cord For Maximum Strength1.5" (40Mm) Molded Neoprene Ankle CuffPosi-Lock Hook & Loop ClosureRedesigned Molded Opti-Flex Leash Ends For Maximum Durability100% Marine Grade Stainless Steel Swivels1" (25Mm) Detachable RailsaverEasy Clip compatible for maximum safetyDimentions: 6' x 1/4" [ 1.83m x 6.5mm ]7' x 1/4" [ 2.13m x 6.5mm ]8' x 1/4" [ 2.44m x 6.5mm ]
DESCRIPTION and FEATURESJohn John Florence sets a high standard on the water. His signature Kainui leash follows suit. Designed for surfing waves in the double overhead range, it features the highest quality 1/4-inch (6.5mm) urethane Dura-Cord with molded ends to keep you connected to your board in big surf. Dakine built its reputation on the surf leash, and everything about this leash is designed with durability, performance and comfort in mind. All John John Florence products feature recycled cardboard packaging with no plastic to help keep our oceans clean for tomorrow.Type: Surf LeashJohn John Florence signature styleUp to a couple feet overhead intended use1/4" (6.5MM) highest quality urethane Dura-Cord for maximum strength1.5" (40MM) molded neoprene ankle cuffPosi-Lock hook & loop closureRedesigned molded Opti-Flex leash ends for maximum durability100% marine grade stainless steel swivels1" (25MM) detachable railsaverEasy Clip compatible for maximum safety8' x 1/4" [ 2.44m x 6.5mm ]
DESCRIPTION and FEATURESType: Surfboard Leash 6' x 1/4" 60% TPU|15% Polipropileno|10% Neoprene|10% Nylon|5% Aço Inoxidável
DESCRIPTION and FEATURESDIAMOND-TECH® Fabric - lightweight strength and water-resistanceDIAMOND-TECH® 2.0 Fabric - strategically positioned on high stress areas for extra durabilityType: Surfboard CoverFOAM Protection - 10mm closed cellArmour Impact System - 20% more protection to tail + noseExpandable Sidewall - FOAM 10mm closed cellMarine-Grade corrosion resistant zipsAero Mesh Ventilation System - to keep boards coolFOAM Padded handle - for carrying comfortStash Shoulder Strap - FOAM 10mm paddedInternal Compression Straps - hold boards in place and keep everything compact
DESCRIPTION and FEATURESWheelie travel Quiver Bag. The essential tool to bring 3/4 boards with you all around the surf world without any effort.10mm Dual Density Padding: provides a tough layer of protection against impact.Air Flow Ventilation System: allows trapped air to be removed from the Boardcover, replacing it with cool fresh air, removing humidity and moisture.Type: Surfboard CoverDiamond Tech fabricCarry handles: EVA reinforced padded carry handle with Neoprene Lining on the underside.Durable Wheels: for added mobility during transit.External reinforced drag plateErgonomic Shoulder strap: double layered and vented to provide the ultimate in comfort and support.Long-life Marine Zippers: durable zipper built for strength, durability and resistance to seizing.Internal and external Straps: secures the boards in the cover.
DESCRIPTION and FEATURESNeo Fin Sox for added comfort when used under fins. The 2mm Neoprene Lo Cut Sox are designed specifically for warm water use with an open heel design, low-line ankle hem for added comfort and reinforced seams. Type: Neoprene Lo Cut SoxWarm water chaffing solution2mm flexible neopreneReinforced seamsOpen heel designLow-line ankle hem for added comfort
DESCRIPTION and FEATURESNeutral, well balanced template.Versatile, high performance Longboard (LB) fin for all conditions. Offers a combination of drive, speed and response for modern longboarding.Type: Surfboard FinsTURN & CONNECT (Seamlessly connect turns and move up and down the board). 2 + 1 Compatible.Suits most LB’s with hard edges.Designed to be used in existing FCS Longboard boxes. No new box required.
DESCRIPTION and FEATURESThomas Bexon’s new signature single fin holds the perfect amount of release and drive.Overview Inspired by the height of Australian old mals in the mid 60’s, this fin incorporates the perfect amount of release and drive for turns along with plenty of hold for nose rides.Type: Surfboard Fins“I have tried a lot of fins and this is the best combination of every element in one fin. A touch of flex in the tip but not too much so it doesn’t get the doughy feeling that really flexible fins can give at times.” – Thomas Bexon.Performance GlassPerformance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
DESCRIPTION and FEATURESFCS II Christenson Keel PG Black Retail FinsDesigned with plenty of curve in the leading and trailing edge to provide smooth rail to rail transitions. A thicker flat foil provides grip through big turns on open face waves.Type: Surfboard FinsPerformance GlassPerformance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
DESCRIPTION and FEATURESDesigned by Al Merrick for the Fish Board model. With a focus on speed and flow, this is a true performance keel. A modern template combined with a progressive flex provides excellent control for power surfing.Type: Surfboard FinsBoard TypesDesigned to fit the FCS II Fin System.Recommended for all board types including fish, funboard and twin fin boards.Performance GlassPerformance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
Mostrando: 1-28 de 40 Item(ns)
