DESCRIPTION and FEATURESThe F2 Alpha is an X-Small size Balanced fin with a Ride Number of 5.5. Alpha's C6 composite material is carbon and air infused making it lighter than Honeycomb. The responsive flex characteristics of C6 combine with the neutral F-Series template to create one of the most exciting new products on the market. All Alpha products are designed and manufactured exclusively in Huntington Beach, Ca USA.Type: Tri FinsSide FinsArea 12.56Height 4.15Base 3.97Foil FLATCenter FinArea 12.56Height 4.15Base 3.97Foil 50/50
DESCRIPTION and FEATURESThe AM2 Honeycomb combines the large Al Merrick template with a medium flex pattern, making this fin a versatile option for bigger surfers in comparison to the Techflex and Fiberglass models. The AM2 Honeycomb fin is designed to perform in a variety of conditions and has a wide base for drive off of the bottom, more rake for big carves and a finer tip for release off of the top. Type: Surfboard FinsSide fins: Height: 4.38" - Base: 4.34" - Area: 13.80"Center fin: Height: 4.38" - Base: 4.34" - Area: 13.80"
DESCRIPTION and FEATURESThe F4 Alpha is a small size Balanced fin with a Ride Number of 5.5. Alpha's C6 composite material is carbon and air infused making it lighter than Honeycomb. The responsive flex characteristics of C6 combine with the neutral F-Series template to create one of the most exciting new products on the market. All Alpha products are designed and manufactured exclusively in Huntington Beach, Ca USA.Type: Surfboard FinsSide Fins: HEIGHT: 4.37", BASE: 4.22", AREA: 14.22", FOIL: FlatCenter Fin: HEIGHT: 4.37", BASE: 4.22", AREA: 14.22", FOIL: Symm
DESCRIPTION and FEATURESType: Surfboard FinsHeight: 4.31 in. 10.95 cm Base: 4.15 in. 10.54 cm Area: 13.00 in. 83.87 cm
DESCRIPTION and FEATURESThe ...Lost Medium Honeycomb thruster fin set from Futures is designed by ...Lost shaper Matt Biolos and is a good all-around fin for everyday surfing. Comes with three fins and a fin key.Type: Surfboard FinsThe fins are 4.50" high and have a 4.36" base.
DESCRIPTION and FEATURESThe Jordy Signature (L), designed by championship tour surfer Jordy Smith, is a large sized fin in the Rake template category. This set is the daily driver for Jordys assault on the World Tour. The Honeycomb construction provides a balanced flex pattern, perfectly suited for Jordys smooth lines. The center fin is smaller than the side fins for increased maneuverability.Type: Surfboard FinsTemplate Category | Rake (drawn-out, control, drive)Construction | HoneycombRide Number | Balanced 5.5Size | Large (180+ lbs)
DESCRIPTION and FEATURESThe trusted Al Merrick template in Alpha construction, made with Netplus recycled fishing nets. Made in Huntington Beach, the Alpha product line combines Bureos NetPlus recycled fishing nets with Futures Compound 6 (C6) carbon and air infused technology. Type: Surfboard FinsTemplate Category | Rake (Drawn-out | Drive)Construction | Alpha (NetPlus)Ride Number | Balanced 6.2Size | Medium (145 195 lbs)
DESCRIPTION and FEATURESThe F4 Blackstix is a small sized thruster in the Neutral template category. The springy flex pattern of the Blackstix construction combined with the V2-Foil give this fin an ultra-lively feel. It's the ideal choice for generating speed in smaller waves.Type: Surfboard FinsTemplate Category | Neutral (balanced, all-around)Construction | BlackstixRide Number | Speed Generating - 9.1Size | Small (105 155 lbs)
DESCRIPTION and FEATURESThe Machado Pivot, designed by style guru Rob Machado, is a large sized thruster in the Pivot template category. This set is designed around the idea of a thruster incorporating the drive and response of a twin keel. The combination of the extended base and reduced rake of the template pair perfectly with Futures' V2 foil to create a very lively feel, ideal for high performance in the pocket surfing. This fin was design in conjunction with the Machado Glazer model. Type: Surfboard FinsTemplate Category | Pivot (Tight-turns | Loose)Construction | BlackstixRide Number | Speed Generating - 7.0Size | Large (but do due to the Pivot/Keel template, suitable for any size)
DESCRIPTION and FEATURESThe HS Plunder 6 fin is a unique and highly versatile 2+1 set specifically designed for use with the Haydenshapes Plunder model. The Plunder can be ridden as a single fin using only the HS 6 center, giving you a flowing feel from rail to rail. To create a little extra speed, a 2+1 setup can be arranged, giving the board a blend of performance thruster and traditional single fin feel. Depending on board size and surfers weight the 7 option might be a better fit. Type: Surfboard FinsTemplate Category | Performance 2+1Construction | C6 (NetPlus)Size | Small 2+1
DESCRIPTION and FEATURESThe Jordy Signature (M), designed by championship tour surfer Jordy Smith, is a medium sized fin in the Rake template category. This set is the daily driver for Jordys assault on the World Tour. The Honeycomb construction provides a balanced flex pattern, perfectly suited for Jordys smooth lines. Type: Surfboard FinsThe center fin is smaller than the side fins for increased maneuverability. This is the smallest fin in our medium range.Template Category | Rake (drawn-out | drive)Construction | HoneycombRide Number | Balanced 5.7Size | Medium (145-195 lbs)
DESCRIPTION and FEATURESThese fins are balanced templates that are designed to work for all surfers in all conditions. The solid base directly transfers power, while the tip is still flexible and resilient allowing it to bend and load up. The White Composite (Thermotech) fins have a consistent flex that hold great on the bottom, and then release through turns. If youre looking for that 'glass on' look, with a higher performance feel than other composites, then you have to try the F series from Futures. Type: Surfboard FinsSide Fins: HEIGHT: 4.37", BASE: 4.22", AREA: 14.22", FOIL: FlatCenter Fin: HEIGHT: 4.37", BASE: 4.22", AREA: 14.22", FOIL: Symm
DESCRIPTION and FEATURESA perfectly Balanced Medium Thruster Fin Set his template is a real no brainer if you are unsure about which fin will suit your new board. A well balanced shape that is not too upright, not too raked & not too big in the base or tip either. This might all sound a bit vanilla to you, but the combination & balance of all these factors means that this is one predictable, reliable fin that will work. A great go to set for small to medium sized surfers, a fin that will get the job done in a variety of conditions & in a variety of different boards. Thermotech fins do not have the traditional plastic feel of a composite fin. Instead they have a consistent flex that creates drive and release through turns. Thermotech fins come with the Futures Truss Base, making them lighter and stronger.Type: Surfboard Finsside fins: Area 15.12, Height 4.56, Base 4.35, Foil FLATcenter fin: Area 15.12, Height 4.56, Base 4.35, Foil SYMM
DESCRIPTION and FEATURESThe Rudder excels in directional control making it a log riders dream fin! With a large area and stiff flex, the Rudder 10 is designed to hold your line and keep you in place on the nose. This is the perfect template for your favorite log.Type: Surfboard Fins13.8 x 6.0 x 0.4 inches
The T1 Alpha is Future's performance twin-fin designed for surfing in the pocket, as well as smooth rail-to-rail transitions that modern twin-fin surfing is known for. The T1 Alpha's carbonized flex pattern and flat foil combine for a super lively feel, helping to generate maximum drive in softer conditions. The set is equipped with the option to ride with a small trailer fin for increased stability creating more of a thruster feel.
Britt Merrick’s new hand foiled signature twin fin set (BMT), is designed to fit between a traditional upright and keel fin. While conceived to maximize the performance and flow of the new CI Twin Pin, the setup works great in any twin fin board when you are looking for the perfect combination of drive, hold, and release. Construction | Fiberglass Side Fin Area 23.58 Height 5.39 Base 5.77 Foil FLAT
The AM1 Honeycomb designed by legendary shaper Al Merrick of Channel Islands Surfboards, is a medium size thruster in the Rake template category. Featuring a balanced flex pattern, this fin's wider base provides increased drive through turns, making it ideal for high performance surfing. The center fin is smaller than the side fins for increased maneuverability. Template Category | Rake (drawn-out/drive) Construction | Honeycomb Ride Number | Balanced – 5.8 Size | Medium (145 – 175 lbs)
The Al Merrick Twin +1 (AMT) generates maximum speed, drive and hold through big carves to perform around pointbreaks or lined up beach breaks. The AMT's honeycomb construction gives this fin a medium flex pattern, while the large area provides ample hold in overhead surf. The set is equipped with the option to ride with a small trailer fin for increased drive and stability, creating more of a thruster feel. Template Category | Pivot (tight-turns/loose) Construction | Honeycomb Size | Medium Twin +1
The trusted Al Merrick template in Alpha construction, made with Netplus recycled fishing nets. Made in Huntington Beach, the Alpha product line combines Bureo’s NetPlus recycled fishing nets with Futures’ Compound 6 (C6) carbon and air infused technology. Template Category | Rake (drawn-out/drive) Construction | Alpha (NetPlus) Ride Number | Balanced – 6.7 Size | Large (180+ lbs)
Box Fillers are designed to be placed into empty fin boxes when not in use. This most commonly occurs when riding a 5-Fin setup as either a thruster or quad, since all 5 boxes are not utilized at the same time. - Qty (2) Box fillers per package *1/2" Box fillers fit Futures center fin and quad rear fin boxes*
Box Fillers are designed to be placed into empty fin boxes when not in use. This most commonly occurs when riding a 5-Fin setup as either a thruster or quad, since all 5 boxes are not utilized at the same time. - Qty (2) 3/4" Box fillers per package *3/4" Box fillers fit Futures front side fin boxes of a thruster, quad, 5-fin or 2+1 set-up*
Use the thumb screw for tool less fin changes in Futures 1-Shot long box Fits most US base single fins and US fin boxes Not for use with Futures standard base fins or Futures ILT fin box
The Futures Fins fin key is a must have for any surf adventure whether it's down the road or around the world. This fin key features the Futures Fins logo, a built in key loop hole and a metal key piece. This handy little thing will work on most any fin type (including Futures Fins and FCS).
The T1 Honeycomb Twin +1 is Future’s twin-fin design for down the line drive, speed and smooth rail-to-rail feel that modern twin-fin surfing is known for. Made with honeycomb construction, the medium flex pattern offers a softer feel than fins from solid fiberglass, helping to create additional lift and drive in softer conditions. The set is equipped with the option to ride with a small trailer fin for increased stability, creating more of a thruster feel. Template Category | Neutral (balanced, all-around) Construction | Honeycomb Size | Medium Twin +1 (145-175 lbs)
The T1 Thermotech Twin +1 is Future's performance twin-fin designed for the type of small wave, in the pocket surfing that modern twin-fins are becoming known for. Made in Huntington Beach, the Thermotech product line does not have the traditional plastic feel of a composite fin. Instead, they have a consistent flex that creates drive and release through turns. Thermotech fins come with the Futures Truss Base, making them lighter and stronger. The set is equipped with the option to ride with a small trailer fin for increased stability creating more of a thruster feel. Template Category | Neutral (balanced, all-around) Construction | Thermotech
The T1 Thermotech is Future's performance twin-fin designed for used in any performance twin model. Made in Huntington Beach, the Thermotech product line does not have the traditional plastic feel of a composite fin. Instead, they have a consistent flex that creates drive and release through turns. Thermotech fins come with the Futures Truss Base, making them lighter and stronger. Available as a pair, these fins are built with 4º cant angle. Template Category | Neutral (balanced, all-around) Construction | Thermotech Size | Medium Twin
The John John Florence Alpha is an extra small sized thruster in the Neutral template category. It is the same template that JJF rode to back-to-back World Championships in Techflex construction. Made in Huntington Beach, the Alpha construction combines Bureo’s NetPlus recycled fishing nets with Futures’ Compound 6 (C6) carbon and air infused technology. Template Category - Neutral (all-around | versatile) Construction - Alpha (NetPlus) Ride Number - Balanced – 5.9 Suggested Wave Type - All types | All conditions Size - XSmall (75 – 115 lbs)
The John John Florence Alpha is a small sized thruster in the Neutral template category. It is the same template that JJF rode to back-to-back World Championships in Techflex construction. Made in Huntington Beach, the Alpha construction combines Bureo’s NetPlus recycled fishing nets with Futures’ Compound 6 (C6) carbon and air infused technology. Template Category - Neutral (all-around | versatile) Construction - Alpha (NetPlus) Ride Number - Balanced – 6.3 Suggested Wave Type - All types | All conditions Size - Small (105 – 155 lbs)
Showing: 1-28 of 31 Item(s)